🔧 Altima - Tie Rod End Replacement

On your Altima, the tie rod end connects the steering rack to the steering knuckle. Replacing it restores tight steering and prevents uneven tire wear, but it must be followed by a professional alignment.

Difficulty Level: Intermediate | Estimated Time: 1.0-2.0 hours (plus alignment)

---

⚠️ Safety & Precautions

• ⚠️ Support the car on jack stands; never rely on a jack.
• ⚠️ Keep hands clear while separating the joint; it can “pop” loose suddenly.
• ⚠️ Do not drive far without an alignment; handling can be unsafe.

---

🔧 Required Tools

Before I give the exact step-by-step (with correct torque specs), I need 2 quick details so I don’t steer you wrong.

• Phone camera

---

🔩 Required Parts

HowToo sells all the parts you need for this repair:

• Tie rod end (outer) - Qty: 1
• New cotter pin - Qty: 1

---

📋 Before You Begin

• Which side are you replacing: front left (driver) or front right (passenger)?
• Are you replacing the outer tie rod end only (the part at the wheel/knuckle), or the inner + outer?

---

🔨 Step-by-Step Instructions

Follow these steps in order:

Reply with the two answers above, and I’ll send the complete procedure with the correct tool list, torque specs, and alignment tips for your Altima.

---

✅ After Repair

• Get a 4-wheel alignment immediately after replacement.

---

💰 DIY vs Shop Cost

Shop Cost: $200-$450 (parts + labor + alignment)

DIY Cost: $30-$120 (parts only, plus alignment)

You Save: $100-$300 by doing it yourself!

Shop labor rates vary but typically run $100-$150/hour. This repair takes a shop approximately 1-2 hours.

---

🎯 Ready to get started?

HowToo makes it easy: same-day/2-day shipping on every part, plus all the tools and specialty tools you need! Check out the parts and tools sections below to add everything to your cart.