🔧 Rogue - Battery Replacement

We need to clarify which battery you want to replace on your Rogue: the main car battery under the hood, or the small battery inside the key fob. The steps, tools, and safety are very different.

Difficulty Level: Beginner | Estimated Time: 0.25–1 hour (depending on battery type)

---

⚠️ Safety & Precautions

• 🛑 Always turn the engine off and remove the key from the vehicle before working on any battery.
• 🧯 Keep metal tools away from battery terminals to avoid sparks.
• 😷 If working on the main car battery, avoid open flames and don’t smoke near the engine bay.

---

🔧 Required Tools

You'll need the following tools for this repair (will differ depending on which battery):

• 🧰 10mm socket
• 🧰 Ratchet handle
• 🧰 6" socket extension
• 🧰 Small flathead screwdriver
• 🧰 Plastic trim tool
• 🧰 Battery terminal brush
• 🧰 Work gloves
• 🧰 Safety glasses

---

🔩 Required Parts

HowToo sells all the parts you need for this repair:

• 🔩 Main 12V battery (group size matched to Rogue) - Qty: 1
• 🔩 Key fob coin cell battery (CR2032 or correct type) - Qty: 1 per fob
• 🔩 Anti-corrosion battery terminal pads - Qty: 1 set
• 🔩 Dielectric grease - Qty: 1 tube

---

📋 Before You Begin

• 🅿️ Park the Rogue on level ground, shift to P (Park), and set the parking brake.
• 🔑 Turn the ignition off and remove the key fob from the vehicle.
• 💾 If doing the main battery, note radio presets and settings; they may reset.

---

🔨 Step-by-Step Instructions

Follow these steps in order:

Step 1: Tell me which battery you’re replacing

• ❓ Are you changing the main car battery under the hood, or the small battery inside the key fob?
• 💬 Reply with: “main battery” or “key fob battery”.

Step 2: I’ll give you the exact steps

• 🔧 Once you tell me which one, I’ll send clear, simple steps just for that battery on your Rogue SV, including where it is, which bolts to loosen, and how tight to make everything.
• 📝 I’ll also point out anything you can easily damage and how to avoid it.

---

✅ After Repair

• 🚗 For the main battery: we’ll check that the engine starts, lights work, and warning lights are off.
• 🔑 For the key fob battery: we’ll test lock/unlock and push-button start.

---

💰 DIY vs Shop Cost

Shop Cost: $60–$90 for key fob battery, $250–$400 for main battery (parts + labor)

DIY Cost: $5–$15 for key fob battery, $150–$230 for main battery (parts only)

You Save: $45–$75 for key fob, $100–$170 for main battery by doing it yourself!

Shop labor rates vary but typically run $100–$150/hour. This repair takes a shop approximately 0.2–0.8 hours.

---

🎯 Ready to get started?

HowToo makes it easy: same-day/2-day shipping on every part, plus all the tools and specialty tools you need! Check out the parts and tools sections below to add everything to your cart.